Dynamic hydrocyclone calcined furnace
Dynamic hydrocyclone calcined furnace is my company to 1997 has successfully developed the first used in powder material of domestic dynamic calcination equipment, and obtains the national patent

Product introduction
Calcination is modified, purification and decomposition, oxidation, reduction of chemical process and sintering process of material is static and dynamic movement, the calcination than the more surface materials, heat transfer speed faster, calcining time shorter. Dynamic hydrocyclone is will powder material calcined with heating of hot air heat flow to form after mixing mutually maximal ratio surface achieve instant calcination, is the guarantee sufficient heat, decompose, improve the quality of the product of the new process equipment.

Working principle
Calcined furnace mainly by gas heaters, gas-solid mixer, the calcined furnace, gas-solid separation collector composition. Pre calcination materials by gas-solid mixer send charging with gas heaters heats, within the hot air mixed flow pattern movement, a spin sintering process in the instant finish, from stoves calcining stoves exports into gas-solid separator, after the separation solids and gases respectively from discharging mouth and platoon a place with a draught eduction.

Performance characteristics
Continuous operation, temperature controlled, insufficient gas-solid mixing fully, the product quality is stable.
Instant calcination, product without burning, be helpful for active products.
System closed, environmentally friendly, high efficiency, civilized production.
Burning tail gas can be equipped with cooler, dryer systematic combination, the effective use of heat energy.
Configuration exhaust recycling system, can undertake tail gas treatment and utilization
Calcined furnace colds and air temperature 500-1600 ℃
Calcination material particle size < 60 orders.
Burning fuels, solid (coal), gas (coal gas, natural gas), liquid (diesel oil, heavy oil).
Combustion way: indirect and direct, internal and external ignition.

Powdery granular materials decomposition

Basic configuration
Usually produce with lead wind device system in micro negative pressure, with direct or indirect way to getting heat, using whirlwind separation, calcined exhaust air cooling, bag, static or water for air purification and recycling products.

Calcination and drying system combination configuration
For effective utilization of the exhaust in energy saving, add dry calcined exhaust part of pre-splitting device, can calcined material preheating and dehydration make exhaust emission temperature drop, effective utilization of energy.

Special process configuration
The special technical requirements for calcination materials such as extended time of heat, the calcined gas recycling, inert gas protection, adopt corresponding configuration structure in order to realize the technological